Using Broken Tiles to DIY Moroccan Tile Table!

STEP BY STEP 👇🏼

I had a few boxes of leftover & broken Zellige hand cut tiles from my laundry room makeover but not enough for another big project. (a / d) So, I decided to tile this cheap MDF console/ entryway table we’ve had laying around! Here’s how I did it 👇🏼

1. I reinforced the table with lots of wood screws since I knew I’d be adding quite a bit of weight to it

2. I applied tile adhesive to the table, then back buttered the backs of the tiles & placed them onto the table! I did small sections since the tile adhesive can dry pretty quick

3. These tiles are hand cut and spacers aren’t typically used with them. So I free handed everything & placed them so they were touching

4. I used a manual tile cutter to cut pieces to side for the front of the table

5. I gave it a few days for the adhesive to dry, then I applied grout in the color Rain with my float. I also did this in small sections & wiped off with a clean sponge!

6. I then used my @colorreader ColorReader EZ (use code LILLY for $10 off) to find the closest paint color match to the tiles, which ended up being Calligraphy by Behr! ✨

7. I painted the underside since & it was truly a perfect match! I love the way it came out!

✨Comment COLOR & I’ll send you the link tor the ColorReader RZ! ✨ use code LILLY for $10 off! #colorreader #diy #tileinspo #zellige #tiledesign #tilefurniture #diyfurniture #furnitureflip #flippingfurniture #howto