How to make a flower welcome sign

🌻Measure and use a saw to cut the board to length of choice. I used the dimensions 24” x 38”.

🥀Use the left over wood to create the flower holder

𝙷𝚘𝚗𝚎𝚜𝚝𝚕𝚢, 𝙸 𝚑𝚊𝚍 𝚎𝚡𝚝𝚛𝚊 𝚠𝚘𝚘𝚍 𝚏𝚛𝚘𝚖 𝚊𝚗 𝚘𝚕𝚍 𝚋𝚘𝚘𝚔𝚜𝚑𝚎𝚕𝚏 𝙸 𝚞𝚜𝚎𝚍 𝚏𝚘𝚛 𝚝𝚑𝚎 𝚜𝚒𝚍𝚎𝚜 𝚘𝚏 𝚝𝚑𝚎 𝚏𝚕𝚘𝚠𝚎𝚛 𝚑𝚘𝚕𝚍𝚎𝚛. 𝚃𝚑𝚎 𝚍𝚒𝚖𝚎𝚗𝚜𝚒𝚘𝚗𝚜 𝚏𝚘𝚛 𝚝𝚑𝚒𝚜 𝚠𝚎𝚛𝚎 𝟸𝟺” 𝚡 𝟼”. 𝚃𝚑𝚎 𝚜𝚒𝚍𝚎𝚜 𝚠𝚎𝚛𝚎 𝟺 𝟹/𝟺” 𝚡 𝟼”.

🌸Glue the flower holder with wood.

𝙸’𝚟𝚎 𝚜𝚎𝚎𝚗 𝚘𝚝𝚑𝚎𝚛 𝚙𝚎𝚘𝚙𝚕𝚎 𝚞𝚜𝚎 𝚗𝚊𝚒𝚕𝚜 𝚊𝚗𝚍 𝚑𝚘𝚝 𝚐𝚕𝚞𝚎, 𝚋𝚞𝚝 𝚝𝚑𝚎 𝚑𝚘𝚝 𝚐𝚕𝚞𝚎 𝚍𝚒𝚍𝚗’𝚝 𝚕𝚊𝚜𝚝 𝚕𝚘𝚗𝚐. 𝙸 𝚝𝚑𝚒𝚗𝚔 𝚖𝚢 𝚊𝚛𝚛𝚊𝚗𝚐𝚎𝚖𝚎𝚗𝚝 𝚠𝚊𝚜 𝚝𝚘𝚘 𝚑𝚎𝚊𝚟𝚢.

🌹Use cabinet clamps to hold the flower holder to stick on the board for 24 hours.

💐Prime the board before painting

🌺Paint the board color if your choice

𝙸 𝚘𝚛𝚒𝚐𝚒𝚗𝚊𝚕𝚕𝚢 𝚠𝚊𝚗𝚝𝚎𝚍 𝚝𝚘 𝚐𝚘 𝚠𝚒𝚝𝚑 𝚊 𝚜𝚊𝚐𝚎 𝚐𝚛𝚎𝚎𝚗 𝚋𝚞𝚝 𝚝𝚑𝚎𝚗 𝙸 𝚍𝚒𝚍𝚗’𝚝 𝚠𝚊𝚗𝚝 𝚝𝚘 𝚛𝚞𝚗 𝚒𝚗 𝚊 𝚜𝚒𝚝𝚞𝚊𝚝𝚒𝚘𝚗 𝚠𝚑𝚎𝚛𝚎 𝚝𝚑𝚎 𝚜𝚊𝚐𝚎 𝚐𝚛𝚎𝚎𝚗 𝚍𝚒𝚍 𝚗𝚘𝚝 𝚕𝚘𝚘𝚔 𝚕𝚒𝚔𝚎 𝚝𝚑𝚎 𝚌𝚘𝚕𝚘𝚛. 𝚃𝚑𝚒𝚜 𝚒𝚜 𝚏𝚛𝚘𝚖 𝚙𝚊𝚜𝚝 𝚎𝚡𝚙𝚎𝚛𝚒𝚎𝚗𝚌𝚎 𝚘𝚏 𝚙𝚊𝚒𝚗𝚝𝚒𝚗𝚐 𝚘𝚞𝚛 𝚑𝚘𝚞𝚜𝚎. 𝙸 𝚍𝚎𝚌𝚒𝚍𝚎𝚍 𝚝𝚘 𝚔𝚎𝚎𝚙 𝚒𝚝 𝚜𝚒𝚖𝚙𝚕𝚎 𝚊𝚗𝚍 𝚐𝚘 𝚠𝚒𝚝𝚑 𝚠𝚑𝚒𝚝𝚎.

🌷Measure the choice of foam (dry or wet foam) to the flower holder bin

🪷Screw the hinges into the back of the board

🪻Twist the hooks onto the bottom of the board about six inches from the bottom of the board

🌼Place the foam into the flower holder

💮Make arrangement with choice of flowers

🌿Place your letters on the board.

𝙵𝚘𝚛 𝚝𝚑𝚎 𝚕𝚎𝚝𝚝𝚎𝚛𝚒𝚗𝚐, 𝙸 𝚍𝚎𝚌𝚒𝚍𝚎𝚍 𝚝𝚘 𝚐𝚘 𝚠𝚒𝚝𝚑 𝚝𝚑𝚎 𝚏𝚘𝚕𝚕𝚘𝚠𝚒𝚗𝚐 𝚜𝚒𝚣𝚎𝚜:

𝚆𝚎𝚕𝚌𝚘𝚖𝚎-𝟹𝟶𝟶

𝚃𝚘 𝚘𝚞𝚛 𝚋𝚎𝚐𝚒𝚗𝚗𝚒𝚗𝚐- 𝟷𝟶𝟻

𝙽𝚊𝚖𝚎𝚜 𝚘𝚏 𝚖𝚢 𝚏𝚒𝚊𝚗𝚌é 𝚊𝚗𝚍 𝙸 - 𝟸𝟶𝟶

𝙳𝚊𝚝𝚎 - 𝟾𝟺

𝚈𝚘𝚞 𝚌𝚊𝚗 𝚘𝚛𝚍𝚎𝚛 𝚝𝚑𝚎𝚜𝚎 𝚟𝚒𝚗𝚢𝚕 𝚏𝚘𝚗𝚝𝚜 𝚝𝚑𝚛𝚘𝚞𝚐𝚑 𝙴𝚝𝚜𝚢 𝚘𝚛 𝙰𝚖𝚊𝚣𝚘𝚗 𝚒𝚏 𝚢𝚘𝚞 𝚊𝚛𝚎 𝚕𝚒𝚔𝚎 𝚖𝚎 𝚊𝚗𝚍 𝚍𝚘𝚗’𝚝 𝚑𝚊𝚟𝚎 𝚊 𝙲𝚛𝚒𝚌𝚞𝚝. 𝙸 𝚑𝚊𝚍 𝚊 𝚜𝚒𝚜𝚝𝚎𝚛 𝚒𝚗 𝚕𝚊𝚠 𝚖𝚊𝚔𝚎 𝚖𝚒𝚗𝚎𝚜.

#wedding #floralweddingsign #engagement #floral #celebration #weddingflowersign